Tesla Owners Online Forum banner

Fixing the front end squeak without grease injection

469 Views 8 Replies 8 Participants Last post by  bwilson4web
Over time, gravity settles the grease below the control arm, ball joint leading to a metal-on-metal squeak. I just fixed my front end, ball joint squeak without injecting grease or replacing the control arm.

Jack up the car; remove the tire, and; remove the clamp bolt. Then use something like vice grips to grab the ball joint shaft and squeeze the boot to get grease in contact. Move it back and forth to coat the ball and the resistance and squeak goes away. The only problem was the clamp bolt threads were wiped out getting the bolt out:
Light Automotive tire Tread Gas Coil spring

So I walked over to Mike's Merchandise, a neighborhood surplus parts store, and bought a substitute bolt, two washers, and locking nut, $0.28:
Tire Wheel Automotive tire Tread Motor vehicle

Those are WD-40 spray stains on the wheel well. I also squirted down the control arm bolts.

Bob Wilson

ps. I was inspired by a UK YouTube that correctly pointed out the grease didn't 'leak out'. Remember, gravity wins.
See less See more
  • Like
Reactions: 2
1 - 1 of 9 Posts
I don’t get how those threads got so stripped, normally that does not happen..any idea?
  • Like
Reactions: 1
1 - 1 of 9 Posts